the complete storage and transport system
Need help? Call us FREE on 0800-6126-430
(office hours 8.30 - 4.30 Mon - Fri, voicemail outside of these times)
Country & Currency
Info & Help
TM
Tray and Compartment Dimensions
Tray dimensions
The overall tray size is 380mm x 255mm., and are are split into SIX main categories:
The overall tray size is 380mm x 255mm., and are are split into SIX main categories:
Standard F-format (36 compartments)
Standard N-format (40 compartments)
Standard M-format (50 compartments)
Standard 0-format (49 compartments)
V-format segmented pick&pluck (6 rows, 30mm wide with 10mm walls)
D-format segmented pick&pluck (5 rows, 40mm wide with 10mm walls)
All of our foam trays are available in 6 compartment depths: 10mm, 23mm, 32mm, 51mm, 70mm and 110mm
To demonstrate the compartment size the pics on the left show a standard 28mm pirate in the F-format and the N-format trays
Many Thanks to Black Cat Bases for the Pirate!
28mm figure in F-format
28mm figure in N-format
Standard foam tray
F-format - 36 compartments
52mm x 32mm
Standard foam tray
N-format - 40 compartments
50mm x 25mm
Standard card tray
Card tray - 49 compartments
50mm x 30mm
Pick&Pluck foam tray
V-format - 6 rows
30mm wide with 10mm walls)
Pick&Pluck foam tray
D-format - 6 rows
40mm wide with 10mm walls)
Individual compartment dimensions
The F-format trays have the largest compartment size for figure storage of any comparable system, at 53mm x 30mm (LxW)
The F-
The N-format are comparable to many on the market at 50mm x 25mm (LxW)
The M-format are ideal for 20-28mm figures at 40mm x 25mm (LxW)
The card trays are 50mm x 30mm x 35mm (LxWxD) (only 1 depth available in these)
The pick&pluck trays are segmented, again a feature uniquely designed for the KR Multicase, which enables you to easily customise your trays and provide optimum support and space usage for your miniatures.
The segmented pick&pluck trays are available in 2 formats, each suits larger vehicles and monsters. The 2 formats suit a wide range of vehicles, monsters and figures on 40mm and larger bases. There are 1:1 scale printouts available from the Tray Printout page which you can use to help decide which would suit your needs best, but if stuck just email us for advice.
Compartment Sizes
We thought it a good idea to additionally demonstrate the compartments sizes available in the 2 basic trays that we supply compared to that in a GW or similar tray. Below you can see rotating pictures showing the foam removed to make our tray compartments (in blue) in comparison to the that from a GW or similar tray (in grey)
Many of you are familiar with the size of compartment that has become quite common place for 28mm figures, and that is show below in grey foam.
The block shown here is from our KRMF4 which as you can see is the same depth as the grey foam, but is 5mm wider. This gives your the opportunity to store up to 144 figures in a KRMF4.
The block shown here is from our KRMF3 which as you can see is again wider by 5mm, but also 7mm deeper. This means that you can store 108 figures in a KRMF3, and the large compartment sizes mean that your space marines, sci-fi figures , and other bulky figures fit more easily.
Segmented Pick&Pluck Trays
Fed up with cutting hole through the bottom of your trays like this?
Then by using our segmented pick&pluck foam trays you can easily combine your tanks, vehicles, cavalry and monsters into one case like these:
(KRMV6 and KRMV5 shown)
The segmented pick&pluck trays are available in various depths depending on your needs. The overall tray size is 380mm x 255mm, just as with the standard trays. The segment and block pattern is now available in 2 formats. The D-format) is designed for DBA, DBM, FOW, and Peter Pig miniatures, though is not restricted to these as it is perfect for many other figures, eg GW Ogres , 40K Terminators, Tau Battlesuits, and Lord of the Rings mounted figures to mention but a few. As a guide the compartment depths are:
V-format segmented pick&pluck and some potential storage options.
Arranged into 24 segments, each 80mm x 30mm, with 4 blocks 20mm x 30mm in each.
Blocks removed from each segment to produce 24 compartments 80mm x 30mm, providing perfect compartments for cavalry and mounted figures.
Blocks and segment dividers removed to form 8 compartments 80mm x 110mm, ideal for 8 unarmoured rhinos, penitant engines or the like.
Blocks and segment dividers removed to form 4 compartments 170mm x 110mm, ideal for 4 heavily armoured rhinos or other vehicles.vehicles.
Blocks and segment dividers removed to form a custom compartment for a landraider and 2 compartments 80mm x 70mm, ideal for 2 dreadnoughts. One side un-modified.
Blocks and segment dividers removed to form a custom compartment for a Devilfish and 2 compartments 80mm x 70mm, ideal for 2 heavily armoured battlesuits. One side un-modified.
Blocks and segment dividers removed to form custom compartments for monsters like tyranids. One side un-modified.
Blocks removed from each segment and segment wall removed to produce 12 compartments 170mm x 30mm, providing perfect compartments for figures with 30mm wide bases, eg 15mm troops, pikemen,
D-format segmented pick&pluck and some potential storage options.
Arranged into 60 compartmentsts, each 20mm x 40mm, separated by 10mm removable walls.
Blocks removed from one half to form 30 20mmx40mm compartments, and the other side to form 15 50mmx40mm compartments
Blocks removed from one half to form 10 80mmx40mm compartments, and the other side to form 4 80mmx90mm compartments and 6 20mmx40mm compartments.
Arranged into 30 segments, each 50mm x 40mm, Perfect for LOTR cavalry on round bases. Find this tray in the KRMD5 with a troop tray for 36 troops in the case too.
Half size pick&pluck arranged into 15 segments, each 50mm x 40mm, Perfect for LOTR cavalry on round bases, combined in a KRMD6 with 2 half trays and 1 full tray to fit 72 troops too!
Standard foam tray
M-format - 40 compartments
40mm x 25mm